Office Chairs As Health And Safety apparatus
Office chairs are a familiar enough site and office workers in most countries have been sitting in them since offices became necessary for scribes and bookkeepers about 5,000 years ago. However, your normal office chair has undergone a revolution in design over the last twenty years or less. The clear purpose of a normal office chair to permit its user to be able to do his or her job at a desk.
However, many office workers are working seated for long spans of time now without needing to get up at all. Before the computer became a standard part of an office worker’s paraphernalia, it was often necessary to get up to get files from the filing cabinet or somewhere else.
These days, they are scanned into a computer and can be referenced from the desk. Beforehand, the office worker would have to get up to fetch paper, envelopes and carbon paper. Nowadays, carbon paper is redundant and the printer’s trays are preloaded with paper of different sizes and envelopes. Dictation that formerly meant going into the boss’s office, now gets delivered on a Dictaphone.
Being seated for long periods like this can be harmful to health. Some people experience restricted blood flow, which leads to cramp, while others adopt a bad sitting posture and develop a bad back. The modern office chair encapsulates a great deal of science and research to try to prevent these and other industrial injuries.
The principals used in the design of these modern office chairs is called ergonomics. In order to apply the principles of ergonomics, it is necessary to be able to modify a chair to suit the body shape of its user. This flexibility has turned the humble office chair into a sophisticated piece of health and safety equipment.
The most important facet of sitting properly is to modify the height of the chair so that the feet can be placed flat on the floor with the thighs parallel to the floor. The pneumatic or hydraulic lever with which you make these adjustments should be accessible from your seated position, so that you can be sure of getting the height right.
The seat itself, or the pan, should be wide enough and deep enough to take the posterior without squashing it and resulting in restricted blood flow. The front or leading edge of the seat should be rounded and about two inches away from the rear of the knees of the sitter.
Armrests are not strictly necessary but are useful for taking a few minutes rest or if you need to do a lot of reading since often the computer keyboard takes up the space directly in front of the sitter, where the book would normally be placed. If the chair has arm rests, they should be modified to suit the elbows of the user.
An office chair should have a back rest which must offer additional lumber support. This lumber support ought to be adjustable upwards and downwards to fit in the small of the back of the sitter. The back rest should extend to head height, otherwise there should be an adjustable head rest, which can be moved up and down to suit.
If your office chair has all these adjustments and you adjust them to suit you, you will greatly reduce the chances of you suffering an industrial injury.
Owen Jones, the author of this piece, writes on many subjects, but is currently involved with leather reclining chairs. If you are interested in a black recliner or any other type, please click through to our site.
Comments are closed