Different plants have different residues depending on what they are manufacturing. There are companies whose main residue is dust. These include powder processing companies, aw milling plant among many others. This powder may be harmful if not well handled. The article below discusses combustible dust explosions.
The first step is to identify whether or not the dirt being produced is combustible. This is the first step towards determining how to go about such a situation. Combustible powder forms in areas of the factory where materials are transferred in large masses. After concluding the type of powder you have, you can get the necessary equipment.
It is important to train your employees. Before they start working at the plant inform about dirt explosions and where they are most likely to occur. Train them on what to do in case of an emergency and tell them the dangers of combustion dirt to keep them in the know. You may have the information printed out in case they need to refresh their knowledge.
Make sure that the plant is cleaned regularly. It is normal for the dirt to settle every time the plant is at work. The secret is not to let it accumulate. If there is no dust, there will be no explosion. Regular cleaning is one of the best methods of avoiding explosions. Make sure that all the hard to reach places are cleaned as dirt is most likely to settle there.
You need to come up with a way of telling if the plant is cleaned as scheduled or not. Some employees may feel that they know better and neglect cleaning out the powder and after a while, the plant come burning to the ground. To steer clear of such a scenario, make sure that you have an inspection crew that can assure of the place being cleaned.
As you dust, the powder may blow away into the air. It may seem harmless but eventually, the powder will accumulate, and the air will be potentially explosive. If the dust is combustible and it does blow too close to an ignition source, the plant will come down faster that you can blink. Recovering from such damage will take a lot of money which may be scared.
Make sure that the ignition points in the plant are as minimal as possible. The ones that are not in use can be completely gotten rid of. You should also put up no smoking signs because some people may be ignorant and lead to the end of the company. Make sure the ignition points are cleared of powder even more regularly than other places.
Use vacuums classified for class 2. This will go a long way in saving your plant from permanent damage. The normally sized vacuums are not well suited to handle the amount of powder emitted in a whole plant. If you try them out, they may break down, overheat and even end up sparking up the place on their own thus a catastrophic outcome.
If you ever have the need for combustible dust processors, the best thing to do is visit the Web and enter the keywords in a search engine. Alternatively, you may go directly to this website at http://www.processrs.com.