Business

For Wood Deck Staining New Jersey Is Worth Visiting

Decks are mostly made of wood. The high level of beauty and the fact that wood is natural are the reasons wood is preferred over other materials. However, regular maintenance is compulsory is order for the wood to preserve its color and grain. This can be achieved in several ways including covering the deck not in use. The second option is to have it stained. When in need of Wood Deck Staining New Jersey should be visited.

Decks are mostly made of wood. The high level of beauty and the fact that wood is natural are the reasons wood is preferred over other materials. However, regular maintenance is compulsory is order for the wood to preserve its color and grain. This can be achieved in several ways including covering the deck not in use. The second option is to have it stained. When in need of Wood Deck Staining New Jersey should be visited.

Decks are exposed to sunlight on a daily basis. As time goes by, the radiation from the sun begins to damage the timber. The effect resulting from this is that the timber begins to warp and its color changes. Although it is natural that timber warps and changes in color when exposed to sunlight, the process happens faster in decks.

Normally, the warped parts of the timber become prone to cracking and even further warping. This can be avoided by application of a high-quality stain on the timber as a way of preserving it. The stain functions to prevent sunlight radiation from penetrating completely into the timber. This way the underlying layers of the timber are protected from damage. Hence, warping is contained.

The second major function of the stain is prevention of rain water or water from other sources from soaking into the timber. As decks are exposed to both rain and cold, if one fails to protect the timber then a lot of water would soak in it. Availability of water creates conducive environment for growth of mold and mildew. Timber that has absorbed water expands and becomes tender after which it rots. A barrier is created between water and timber by the stains.

When staining a deck, preparation is a key determinant of the final results that one can achieve. The first thing one should do is to clean the timber well before applying stain. The surface needs to be completely smooth at the time stain is applied. If the surface is dirty, then the stain is prevented from penetrating into the timber, which results in poor work being done.

Newly installed surfaces with only a few days old need to be thoroughly cleaned to remove mill scale. On the contrary, if the surface is old and one is reapplying the stain, then dirt, mildew and old stains need to be removed prior to application. It is advised for one to perform the cleaning using a deck scrub. Scrub makes the removal of grime and dirt to be simpler and also kills mildew.

When the cleaning is finished, the next step is application process of the stain. There are various types of stains which makes reading of instructions on the label very important prior to commencing the work. The person applying the stain must draw their attention to the manufacturer recommended number of coats and applicable intervals between coats.

A brush or a paint roller can be used for the application process. Preference is given to the paint brush as it helps to push the stain into timber grains. Brushes achieve better results as they generate friction that improves stain absorption by the wood. Before using the surface, one should allow enough time for it to dry.

When you are searching for information about wood deck staining New Jersey residents can come to our website today. More details are available at http://www.aaapressurewash.com/why-stain-your-deck-4-reasons-to-use-exterior-wood-stain now.