FAAC has a history of over forty years of gaining experience, evolving and becoming the company that we find today as being meticulous and dependable. Manufacturing in Italy and also Ireland and selling products in more than one hundred countries worldwide FAAC became an international symbol for quality. Specialized in automation systems, the company makes even massive structures seem light and the simplistic design of the applications borrows smoothness and durability to the systems. Working on a professional level, the manufacturers always run an enormous amount of tests and begin selling a product only when they are completely satisfied.
This company sells a great variety of gate automations that differ from operators that are suited for small pedestrian gates to heavy duty applications that are in a commercial usage. Operators can be electro- mechanical or hydraulic. Both kinds can be easily mounted on the gate and are programmable in a surprisingly simple manner via a button unit. FAAC automation systems offer physical security from where emotional security derives, they are easy to manage, are convenient and safe. Other plus for the systems are the fact that it works very quick and we are talking about a matter of seconds here and are simple to mind. Gate automation system may seem too complex and its mechanism too hard to understand, but it actually works pretty simple and elegant. I am not saying there is any lack of complexity in FAAC’s products, but they are not showing at all the amount of work behind every application, although there is a tremendous amount of research and testing.
How you can install an opener? There are three things that you need to do before you embark on starting off with the installation. You need to decide the area, where you would install the device. Most of the automatic gate opener devices are dug within the ground. Secondly, one needs to put the trenches and posts within the ground for that. So, one must always contact the local authority to know about underground utilities passing through that area. Otherwise, you might accidentally damage them. After you are done proceed in the following method which is the last thing to do: Spray paint the area that you need to dig. Drill holes for the gate post and position the gate properly before you begin. Then drill holes for placing the control box of the gate opener.
Many versions ofare available now on the market and they all are the result of a long and intense process in which the products were pushed towards perfection by the manufacturers. Some of these systems are suitable for light and some for heavy duty, some have a simplistic design, others seem to be almost invisible, some are strong and able to hold heavy pillars while others have a smooth routine that cannot even be heard. All in all these applications are practical, easily manageable and installable, they are economical with a low consumption and some even have a battery back- up unit.
The key pad post should be installed properly Finally the control box needs to be mounted securely. Since the control box is the key to all the accessory devices of the gate opener, it is positioned near to the hinge posts of the gate. If the gate opener is battery operated, then the wires to the battery should be connected to the opener as well. It is necessary the charge the batteries fro time to time. It is also necessary to change the battery when the need be. If the control is electrically operated, then one needs to check the electric lines from time to time. The necessary information of installation is given in the manual. One should always read it carefully and should also make sure that the safety measures are observed correctly and safely.
Learn more about the.